Version 1.0    Model   11.25.2007                                                                                                              the best view at 1280x1024 and above

www.deltasimstudio.com                                              

Here  you will find all Deltasim news, boats, documentation and files to download.

THIS PRODUCT IS SHAREWARE,      PRICE: $  9.90  U.S.                   

BEFORE YOU BUY - READ  THIS GUIDE 

Features:

Total dimensions: (L,W,H feet) --------------- 96 , 23.8 , 39 ft
Draft: --------------------------------------------------- 5.8 ft
Displacement: -------------------------------------- 113.2 ton
Fuel: ---------------------------------------------------- 600 gal.
Moving parts: ---------------------------------------- rudder, throttle, gauges, switches, door, hatches, flags, crane with pontoon, windshield wipers, radars
Controlled: ------------------------------------------- crane with pontoon, wipers, speed, reverse engine, turns, leans, lights
Panel: -------------------------------------------------- virtual cockpits - full 3D: gauges, switches, instruments
Engine: ------------------------------------------------ 2 x 1550 HP Cat. C30
Equipment: -------------------------------------------full exterior equipment and full helm interior - furniture, equipment
Starter: ------------------------------------------------ 2x one touch switch for engines
Model: ------------------------------------------------- 1 model, - three variants
Documentation: ------------------------------------ included
Disk space: ------------------------------------------ 115 Mb


Exterior model

This is very realistic and accurate model with very detailed parts.





 VC - VIRTUAL BOAT

 Daisy has real and accurate virtual cockpit with custom gauges and moving parts. Now you can travel within whole ship (interior) more
comfortable and faster. The model has adjusted camera definitions for most important places on the boat.

 

 

Some details:   illuminated stairs                                                          anchor equipment

 

Moving crane with pontoon - operated by the crane switch.

 

PANEL DIAGRAM



Door open by the knob click.



 Daisy has natural and accurate lights with bloom effect applied.



Daisy by night



Daisy has new, very realistic wake and spray track



          
Installation:

 Run setup program and during the installation process - insert the registration code 
which you will get  by e-mail  after  PayPal  transaction confirmation - max. in 24 hours

 This software requires  about 115 Mb disk space

 Flight:

 In the archive file, you can find folder: FLIGHT SIMULATOR X FILES.
Copy and paste this folder to the MY DOCUMENTS, then start Flight Simulator X.
In the main menu choose FREE FLIGHT and click LOAD button then choose the flight: Deltasim_Daisy_Caribbean
 Vista users:
 C:\USERS\USER\NAME\DOCUMENTS

 BOAT VARIANTS

 Choice the boats

You have three variants of the ship:









 VERY IMPORTANT !

Before you change the variant of yacht or any model, stop the engine or lower sail !

 Hints:
 - If you mix panel switches with keyboard keys the control light will lost correct relation of events,
I mean, if you change a variant of boat without engine stop your new variant will sail without correct
control light of engine (start-stop)
The same concern other moving parts controlled by the switches.

- If the ship can not start with engine, it's mean the wind is to strong - turn the boat around in place
with Z axis to sail with the wind or reduce the wind ( same with reverse )

- For best behavior in the water you can use X axis in your joystick  (to lean)

                   

But use the X axis gently with sense

 BOUNCE PROBLEM

 - this is long time mip-maping loader with very detailed, extremely texture resolution and it's may occur during the
first minute of the sail (at the sea level), later all getting back to normal.  - solution:
move your texture resolution to the left - at 1m position.





 HOW  TO STAND A BOAT IN THE WATER ANYWHERE YOU LIKE

1 - start with any float plane
2 - land in the water where you will sail
3 - stop the engine(s)  !!!!!
4 - change the airplane to your boat
5 - If you want to sail in this place in a future, save your flight.
6 - sail

 Start procedure:

Adjust SETTINGS REALISM first. To feel wind, adjust General slider to the right. If you have strange behavior  in the water - mark IGNORE
CRASHES




 1 -  switch on: battery
2 -  push F1 key to set throttle at 0  -  VERY IMPORTANT !
2 -  switch ON engine 1 and engine2
3 -  sail
4 -  use throttle control for speed

 THE  KEYS

 BOOM TRIM

 F5, F6, F7, F8

 TRAVEL

SHIFT + ENTER  ---------------------------------------- UP
SHIFT + BACKSPACE  ------------------------------ DOWN
CTRL + SHIFT + ENTER ----------------------------- RIGHT
CTRL + SHIFT + BACKSPACE  -------------------LEFT
CTRL + ENTER ------------------------------------------ BACK
CTRL + BACKSPACE -------------------------------- FORWARD

VIEW

 SPACE + MOUSE MOVING  ---------------------- THE BEST AND QUICK : ZOOM, MOVING, TURNS
F9  ------------------------------------------------------------ VC
F10  ---------------------------------------------------------- MINI PANEL
F11  ---------------------------------------------------------  TOWER
F11  ---------------------------------------------------------  TOP
A  ------------------------------------------------------------  TOGGLE CAMERA
S  ------------------------------------------------------------  TOGGLE VIEW
-   ------------------------------------------------------------- ZOOM (-)
+   ------------------------------------------------------------ ZOOM (+)
CTRL + SHIFT ------------------------------------------  TOGGLE   ZOOM  (-,+)
CTRL + SPACE  ---------------------------------------  RESET VC VIEW TO DEFAULT

 VIEW BY CAMERA DEFINITION

INSIDE :               F9   >>>  SHIFT + S   >>>  A, A, A, A......
OUTSIDE :          F 10  >>>  SHIFT + S  >>>  A, A, A, A.......

 ENGINE

FOR START AND OFF ENGINE USE VIRTUAL COCKPIT SWITCH
F2  --------------------------------------------------------  REVERS ENGINE   (AND QUICK BREAK)
F3  --------------------------------------------------------  SLIGHTLY FORWARD
F4  --------------------------------------------------------  FULL POWER
F1  --------------------------------------------------------  POWER OFF
* ,  -     (NUMPAD) ---------------------------------  ADDITIONAL BREAK

 RUDDER STEERING

 0   (NUMPAD) ------------------------------------------  LEFT   -------------> carefully, with sense
 ENTER   (NUMPAD) ---------------------------------  RIGHT  ------------> carefully, with sense
5  (NUMPAD)  ------------------------------------------  STRAIGHT
 ANY CONTROLER WITH THREE AXIS  X,Y,Z;       Z- AXIS = TURN LEFT, RIGHT
Any comments, please e-mail to:  Robert Waszkiewicz     dss@deltasimstudio.com 
 
     www.deltasimstudio.com                  

11.25.2007

® Copyright 2007  by  Robert Waszkiewicz   Deltasim Studio.  All Rights Reserved.